Lexmark Standard Bin Full Error
It is an issue many printer users dread – the Lexmark Standard Bin Full error. This common error occurs when the Lexmark printer tray is full and cannot hold more paper. You may be experiencing the same problem if your printer display screen is showing an error message like ‘Printhead Error 1204, Tray Door Open’ during printing. Although you will have to troubleshoot more specifically depending on the error message, don’t fear. Here are some basic steps to help you resolve this common issue.
Step to Resolve Lexmark Standard Bin Full Error
Step 1: Check if the Paper Tray is Actually Full
It sounds obvious, but the first step to resolving the Lexmark Standard Bin Full error is to check if the paper tray is actually full. To do this, open the paper tray and see if any blank pieces of paper remain. Don’t be alarmed if the tray looks empty but is marked full by the printer. This is because of the tray sensor, which tells the printer that the tray is full even when it isn’t.
Step 2: Ensure That the Tray is Properly Positioned
If the paper tray isn’t actually full, you should make sure that it is properly positioned. To do this, slide the paper tray into the Lexmark printer until it clicks into place. Once locked, the tray should be firm and flush with the printer housing.
Step 3: Make Sure That Paper Is Being Loaded Properly
Another possible reason for the Lexmark Standard Bin Full error could be that paper is not being loaded properly into the tray. Be sure to place it the right way up (the side that should be facing up is usually labeled on the paper tray) before pushing it in as far as possible. If you notice any folding or irregularities while loading the paper, stop the process immediately so you can check the integrity of the paper stack.
Step 4: Clean the Printer
If the Lexmark Standard Bin Full error persists, the problem could lie with a dusty or obstructed printing process caused by debris occupying the paper feed path. This can be easily resolved by cleaning the printer, so turn it off and unplug it before beginning the process.
To start, use a soft and dry cloth to brush away debris from the paper tray. You can also use a can of air or even a vacuum with a crevice attachment to eliminate built-up dust inside the printer tray. It’s important that you clean both sides of the printer rollers, ensuring that no residue is left over.
Step 5: Clear the Jammed Paper
Sometimes, the Lexmark Standard Bin Full error might occur when paper is jammed inside the printer. To clear a paper jam, start by unplugging the printer and removing the tray. The next step is to open the printer so you can access the inside and identify the jam. Carefully unroll the paper and remove it from the printer. If you are having trouble removing the paper, try using tweezers.
Conclusion
The Lexmark Standard Bin Full error is a common issue that can be easily resolved with the steps described above. First, you should check to see if the paper tray is full and properly positioned. You should also make sure that paper is being loaded properly into the tray and that the printer is free of dust and debris. Finally, if you have identified a paper jam, do not try to force it out. Instead, be sure to properly unroll the paper, then remove it from the printer. If these steps fail to resolve the issue, contact Lexmark’s customer support team for additional help.