How to Resolve Epson Printer Error 100016?

Fix Epson Printer Error 100016

Epson Printer Error 100016

Epson printers are considered one of the most reliable and efficient printers available on the market. They are both easy to use and handle a variety of different tasks. However, as with all electronic equipment, even the most reliable components can encounter issues and problems from time to time.

One of the most common errors encountered with Epson printers is Error code 100016. This specific error code indicates that the printer has encountered an internal cartridge or printhead error, and therefore, the printer is unable to proceed with a print job. This issue can be rather frustrating, but thankfully, it is usually rather easy to resolve.

Step to Resolve Epson Printer Error 100016

  • Turn off the printer and disconnect the power cable and USB cable.
  • Check the USB cable and make sure it is properly connected.
  • Reinstall the driver and software for the printer and restart your computer.
  • Once you are done with the installation process, re-connect the power and USB cables.
  • Try to sync the printer with your computer and check if the error 100016 is resolved.
  • If the error still persists, then reset the printer by pressing and holding the power button for around 3 to 5 seconds.
  • After the reset, check to see if the Epson Printer error 100016 is gone.
  • If the error is still not fixed, then you may need to contact Epson tech support for assistance.

How to Fix Epson Printer Error 100016?

In this article, we’ll discuss the steps you should take when you encounter Epson Printer Error 100016 and how you can resolve it quickly and effectively.

The first thing you should do when encountering this error is to check the cartridges and printhead to ensure that they are properly seated and that there is no blockage preventing them from printing. To do this, you should open the lid of your printer and inspect both the printhead and the cartridges visually. Also, make sure to check the connectors and check that there are no signs of damage or any dirt or debris that may be preventing the printhead or cartridges from functioning properly.

Once you have verified that the cartridges and printhead are properly seated and that there is no debris blocking their movement, you can proceed to perform a self-test. The self-test will put the printer through its paces and identify any problems that may be preventing it from functioning correctly.

To perform a self-test, press and hold both the maintenance button and the power button at the same time. Once both buttons are held for several seconds, a series of cleaning cycles will begin. This will take anywhere between 10-20 minutes depending on the model of your printer and during this process, the printhead and cartridges will be given a thorough clean and any Blockages that could be causing the printer issue will be cleared.

Once the self-test has been completed, the error code should have been successfully resolved. It is a good idea to repeat the self-test once or twice more to ensure that all parts of the printer are functioning correctly. If the error still persists after a repeated self-test then it’s time to take a look at the internal components of the printer.

If the Error code 100016 is still present after completing the self-test, then it is likely that the issue is due to an internal component that is no longer working. In this situation, it would be advised to contact Epson Support and explain the issue you are experiencing with your printer. With the help of an Epson technician, they can troubleshoot the printer and identify the defective parts that need to be replaced.

In most cases, Epson Support can offer a replacement part quickly or guide you in replacing it yourself. Replacing the defective internal components of the printer should solve the problem and get your printer back up and running in no time.


In conclusion, Epson Printer Error Code 100016 is usually a minor issue that can be easily resolved by performing a self-test and checking that all parts of the printer are properly seated. With that said, if the error persists after a repeated self-test then it would be advisable to contact Epson Printer Support for assistance and recommendations. Epson Support can help to identify the defective parts that are preventing your printer from working correctly and replace them if necessary, so you can get back to printing in no time.