How to Connect Lexmark Printer to WiFi Without CD?

Connect Lexmark Printer to WiFi Without CD

Lexmark Printer Connect to WiFi Without CD

Connecting a Lexmark printer to a WiFi network is a relatively easy task, and can be done without the need for a CD. WiFi printers are becoming increasingly popular, and connecting them to a wireless network is becoming simpler with advancements in technology. This article will provide step-by-step instructions on how to connect a Lexmark printer to a WiFi network without the need for a CD.

Step to Connect Lexmark Printer to WiFi Without CD

  • Make sure that your Lexmark printer is connected to a power source and is turned on.
  • On the printer control panel, press the Home button.
  • Select the Network Settings option.
  • Select Wireless Setup Wizard.
  • Select your Wi-Fi network from the list of available networks.
  • Enter your Wi-Fi network password if prompted.
  • Once the connection is established, the printer will display a confirmation message.
  • Close the printer control panel and your Lexmark printer is now connected to your Wi-Fi network.

How to Setup Lexmark Printer to WiFi Without CD?

The first step to connecting a Lexmark printer to a WiFi network is to locate the printer on the network. To do this, you will need to locate the printer’s IP address. This can usually be found on the printer’s display or in the printer’s manual. Once you have located the IP address, you will need to open your preferred web browser and type in the IP address. This will take you to the printer’s web page.

The second step is to select the “Network” tab on the printer’s web page. This will open up a list of available networks, and you will need to select the network that you want to connect the printer to. Once you have selected the network, you will need to enter the network password. Once the password has been entered, the printer should automatically connect to the network.

The third step is to install the printer’s driver. This is important as the driver will allow your computer to recognize the printer and allow you to use it. To install the driver, you will need to go to the Lexmark website and download the correct driver for your printer model. Once you have downloaded the driver, you will need to open the downloaded file and follow the instructions to install the driver.

The fourth step is to configure the printer’s settings. To do this, you will need to open the printer’s web page and select the “Settings” tab. Here you will be able to configure the printer’s settings such as the paper size and type, resolution, paper tray, and other settings.

Once you have made the necessary changes, you will need to save the settings.

The fifth and final step is to test the connection. To do this, you will need to open a document or image file on your computer, and then select the “Print” option. This will open up a print dialogue box, and you will need to select the Lexmark printer from the list of available printers. Once you have selected the printer, you can then click the “Print” button to send the document or image to the printer. If the printer is connected to the network correctly, it should print out the document or image.

By following these five steps, you should be able to connect your Lexmark printer to a WiFi network without the need for a CD. It is important to note that the exact steps may vary depending on the model of your printer. If you are having difficulty with any of the steps, you may need to consult the printer’s manual or seek the help of a professional.